|
A breathtaking masterpiece combining antique Swiss horology with artistic celestial design!
Up for sale is an extraordinary marriage (conversion) wristwatch featuring an authentic antique Zenith mechanical pocket watch movement, serial number 425780, dating back to approximately 1903.
This historic movement has been meticulously hand-engraved, fully skeletonized, and rehoused into a modern, high-quality stainless steel case with a luxurious gold PVD finish. The front display features a striking, custom "Solar System / Planetarium" orbit motif dial with blued steel hands and colorful planetary accents, while the exhibition case back reveals the intricate gold-finished movement in full action.
Key Features:
✔ Authentic antique Swiss Zenith movement (Serial #425780, c. 1903)
✔ Fully skeletonized & hand-engraved movement architecture
✔ Unique "Solar System / Planetarium" celestial design dial
✔ Modern heavy-duty Stainless Steel case with Gold PVD coating
✔ Front & Back exhibition mineral crystals
✔ Fitted with a new, premium high-quality Romiks genuine leather strap
This one-of-a-kind timepiece seamlessly connects over a century of Swiss watchmaking history with modern wrist presence. A true collector's item and a major conversation starter!
DEFECTS: Exceptional condition! Minor handling/storage marks on the case if any (10/10 condition). The historic movement has been fully serviced, cleaned, oiled, and tested.
COUNTRY OF ORIGIN: Switzerland (Movement) / Custom Marriage
MANUFACTURER: Zenith (Swiss Made)
OVERALL CONDITION (10-point scale): 10
CASE & BEZEL
Modern stainless steel case with high-durability Gold PVD coating and clear exhibition case back.
Condition (10-point scale): 10
GLASS
Material: Mineral Glass (Front & Rear)
Condition (10-point scale): 10
DIAL
Custom skeletonized "Solar System" celestial dial with orbit track lines, colorful planetary markers, and classic blued hands.
Condition (10-point scale): 10
STRAP
Brand new high-quality Romiks brown genuine leather strap with matching gold-tone buckle.
MOVEMENT
Mechanical: hand-winding
Caliber: Zenith Antique Pocket Watch Movement (Serial #425780)
Condition (10-point scale): 10 (Fully serviced, hand-engraved skeletonized movement, keeps great time)
DIMENSIONS, WEIGHT, FUNCTIONS
Case Diameter (without crown) |
1.89 inch (48.0 mm) |
Case Width with crown |
2.09 inch (53.0 mm) |
Lug to Lug Length |
2.20 inch (56.0 mm) |
Depth / Thickness |
0.61 inch (15.5 mm) |
Crystal Diameter |
1.75 inch (44.5 mm) |
Total Weight (with strap) |
4.59 oz (130.0 g) |
Function |
Hours, minutes, sub-seconds |
Movement Origin |
Switzerland (Zenith) |
Dimensions of watches
ABOUT MARRIAGE WATCHES
A Marriage Watch (or conversion watch) is the craft of taking an authentic vintage pocket watch movement - often crafted by legendary Swiss manufactures like Zenith, Omega, or Longines - and fitting it into a modern, custom-made wristwatch case. This process breathes second life into historic mechanisms that would otherwise remain hidden in pocket watch cases, turning them into wearable works of horological art.
RECOMMENDATIONS
All Antique and vintage watches are mechanical. Repairs require precision, so please handle this historical artifact with care.
- Vintage mechanical watches should not be beaten or dropped - shocks can damage the balance staff.
- Vintage watches are generally NOT waterproof. Protect your timekeeper from direct contact with water, heavy rain, or high humidity.
- If your watch becomes wet it should be dried off quickly. Carefully open all covers and use a hair drier to blow dry the movement, dial, covers, crown. This will reduce the amount of rust.
- If your watch becomes wet with any kind of salt water you should immediately immerse or spray your watch with fresh (no-salt) water to remove all the salt from the works before drying the watch completely. Any salt left in the watch will combine with moisture in the air to rust metal components of the movement, case etc.
- Winding any mechanical watch tight may break the mainspring. Stop winding as soon as you feel the natural resistance tightening up.
- When adjusting the hands of your watch, move them in a clockwise direction only to prevent stress on the gear train.
- If you must adjust counter-clockwise make it for small adjustments only (i.e. for minutes, NOT hours).
- Be careful and gentle when adjusting the movement speed (faster or slower). Don't make sharp movements, and don't touch other components in the movement especially the pendulum mechanism.
- Every 2-3 years it is recommended to service, clean, and oil vintage watches to keep them running accurately for decades to come.
- IF the watch is dirty - allow the watch to run down, don't wind it again until you have it serviced by a qualified watch repair expert. Dust will absorb and remove important lubricants and cause the movement pieces to wear down.
- To clean the case, dial and crystal you should use a cloth that does NOT leave fibers as these may get caught up in the movement. Check with your Watch repair expert to get an appropriate cloth.
- Keep your watch away from strong magnetic fields (large speakers, modern computers, magnets) since magnetic exposure can alter the balance spring performance.
- Most Cases and Covers are fine components and will not handle abuse well. The watch should not be shaken, beaten, or stressed.
- Vintage mechanical watches naturally experience a daily deviation error of up to a few minutes. An accuracy of +/- 3 to 5 minutes a day is considered excellent for a classic timepiece.
- Mechanical watch is not recommended to use for engage in extreme sports, and expose them to excessive vibration loads. Recoil force, which take on the clock, affect their reliability and precision. No matter how perfect was not anti-shock mechanism, there is always the chance of excessive load that details of the mechanism can not survive.
-
Watch with calendar. It is not recommended to adjust, the date between 20.00 and 06.00, because at this time involved a mechanism for automatic adjustment date. Translation pointers calendars manually in this position arrows may damage the mechanism. Date changes should be made, relegating pre-clockwise to lower sector of the dial (for example, to position 6 (18.00) hours).
-
Chronograph watches. In most cases, these watches contain the "start/stop" button and "reset" button. It is strongly recommended not to press the "reset" if the chronograph is running. Before you use the "Reset" button need to stop the chronograph by button "start/stop". Using the "reset" when running chronograph can damage the mechanism of most models of watches.
PAYMENT
- Total amount due includes the final item price plus Shipping.
- Shipping charges are determined based upon the destination address. Please note that buyers are responsible for any applicable local customs procedures.
SHIPPING
We ship worldwide! This item will be securely packed and dispatched to you from Europe (Ukraine) via registered international airmail, complete with a tracking number and insurance coverage. Shipments are processed within 1-3 business days after payment clears.
Typical Delivery Timeframes:
-
European Countries: approximately 7-10 days;
-
USA, Canada, Japan & others: approximately 10-14 days.
NOTE: Actual delivery speeds depend heavily on your local customs handling and postal services. Rest assured, we pack all items with extreme care to guarantee they reach your doorstep in perfect condition!
RETURNS/REFUNDS
We accept returns in compliance with standard platform terms. Items must be returned in their original vintage condition as received. Return shipping costs are to be covered by the Buyer.
FEEDBACK
We strive for 100% customer satisfaction and look forward to earning your positive feedback! If you experience any issues or have any doubts upon receiving your parcel, please contact us immediately *before* leaving neutral or negative marks. We are always here to help resolve any issues amicably.
Thank you for your interest in our vintage treasures!
Please let us know if you have any questions. Good luck!
|
